Jomar Model 135
The Model 135 is where customers can really see the benefits of the small Jomar footprint. Capable of generating many millions of bottles per year, it’s hard to fin d a machine that matches the 135′s output per square foot.
The size of the machine required and the number of cavities that can be installed on that machine depends on two main criteria: the ability to clamp the preform mold during packing without flashing the preform, and the number of blown bottles that can fit within the operational distances on the trigger bar situated in the transfer table.
A Jomar representative will help you through the process of machine selection, but please note the figures for clamp tonnage, trigger bar lengths and other details below.
|Preform Clamp:||135.4 US Tons||123 Metric Tons|
|Casting Area:||77.4 cubic inches||499 cubic centimeters|
|Blow Mold Clamp:||28 US Tons||25.4 Metric Tons|
|Shut Height:||10.00″||254 mm|
|Press Stroke:||6.00″||152.4 mm|
|Maximum die set:||22.00″(W) X 44.00″(L)||559 mm X 1,118 mm|
|Max Trigger Bar Length:||41.00″||1,041.4 mm|
|*For information on available trigger bar lengths, please contact us.|
|Max Swing Radius:||35.22″||895 mm|
|Shot Capacity:||550 grams with a 3.0″ (76.2 mm) diameter 30:1 L/D Vertical Screw|
|Motor Size:||Standard 100 hp (56kw)|
|Recommended Power Service:||250 amps @ 380V – 460V, 3 phase 50 – 60 hz|
|Height – With 2.5″ (63.5 mm) 24:1 screw:||134″||341 cm|
|Installed Weight:||32,200 lbs||14,606 kg|